Yamaha's audio engineers have specifically designed the new P-S Series power amplifiers to be perfect companions to the popular Club Series loudspeakers. To achieve this, they made sure that the amplifiers are capable of delivering power that matches the power handling capabilities of the Club Series Speakers, and equipped them with YS Processing (Yamaha Speaker Processing) to deliver a signal that will result in optimum system performance. Power is plentiful, ranging from 3200 watts from the P7000S to 1300 watts from the P2500S in 4 ohms bridged mode. If you want the perfect power amplifier for pair of Club S115s with a 500-watt program rating, for example, the P5000S with 500-watts per channel into 8 ohms is the obvious choice.
specifications
- Pro-quality power in a wide range of configurations
- Perfect tuned via YS processing for use with the popular Club Series speakers
- Yamaha's exclusive EEEngine technology for high performance with exceptional efficiency
- XLR and 1/4" TRS inputs
- Neutrik Speakon, phone plug, and 5-way binding post outputs
- Sweepable high- and low-pass filters
- Variable speed fan
- Dynamic power; 1kHz 20ms nonclip 2ohms 1000W x 2, 4ohms; Bridge 2000W
- Output power; 1kHz 4ohms 590W x 2, 8ohms 390W x 2
- Output power; 20Hz-20kHz 4ohms 450W x 2, 8ohms 350W x 2, 8ohms; Bridge 900W
- Total harmonic distortion Less than 0.1% (20Hz-20kHz; Halfpower), RL=4ohms
- Intermodulation distortion Less than 0.1% (60Hz:7kHz=4:1; Halfpower)
- Frequency response +0dB, -1.5dB (RL=8ohms, 20Hz - 50kHz)
- S/N ratio 102dB
- Power band width 10Hz-40kHz
- Crosstalk Less than -70dB
- Damping factor More than 200
- Voltage gain 32dB
- Input sensitivity +4dBu
- I/O Connectors Line input / output ports 2x XLR-3-31, 2x 1/4"TRS phone jack, Speaker output ports 2x speakON, 2x 5-way binding post, 2x 1/4"Phone jack
- Processors HPF/LPF (25Hz-150Hz sweepable, 12dB/Oct), YS Processing
Light Weight for Easy Transport and Setup
Look at the specifications and you'll notice that the P2500S and P3500S are surprisingly light in weight, making transport and setup less of a chore. What is really impressive, however, is the difference in weight per watt when you look at the P5000S and P7000S. The use of an advanced switching power supply makes these two models very lightweight while maintaining superior audio quality.
Versatile ConnectivityTo provide the most versatile connectivity possible, all four models are equipped with Neutrik Speakon* output jacks and 1/4-inch output jacks for each channel, in addition to 5-way binding post. Balanced XLR and 1/4-inch TRS jacks are provided for channel input.
EEEngineEEEngine (Energy Efficient Engine) Technology makes more efficient use of AC power by reducing power consumption and heat generation without sacrificing output power or sound quality. When power requirements are low, the system uses a highly efficient current buffer to transparently switch input power on and off as needed. As power requirements increase, an independently responding auxiliary power line supplies additional power as required. Output isn't compromised because the auxiliary power line is driven by the power supply voltage which maintains maximum output to the speaker load.
YS ProcessingYS Processing (Yamaha Speaker Processing) achieves optimum matching with our popular Club Series loudspeaker systems. This special circuit optimizes output from the power amplifier to match the characteristics of Club Series speaker systems, resulting in extra-smooth highs and enhanced lows.
For More To Go 123DJ
