The DriveRack® PA2 provides all the processing you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx’s proprietary AutoEQ™ and AFS™ algorithms, a new input delay module for delaying the FOH system to the backline, Ethernet control via an Android®, iOS®, Mac®, or Windows® device, and updated Wizards, the DriveRack PA2 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.
Specifications
- Input (2) line inputs. (1) RTA Mic input
- Input Connectors (2) Female XLR line inputs. (1) Female XLR RTA Mic input
- Input Type Electronically balanced/RF filtered
- Input Impedance >50 kohm
- A/D Converter dbx Type IV™ Conversion System
- CMRR > 45dB
- Mic Preamp Phantom Power +15VDC (RTA)
- Mic Preamp Equivalent Input Noise (EIN) < -117dB, 22Hz-22kHz, 150 ohm (RTA)
- Output (6) Line Outputs
- Output Connectors Male XLR
- Output Type Electronically balanced, RF filtered
- Output Impedance 120 Ω
- Max Output +20dBu
- A/D Dynamic Range 112 dB A-weighted, 110 dB unweighted
- Type IV Dynamic Range 123 dB with transient material, A-weighted, 22kHz BW; 121 dB with transient material, unweighted, 22kHz BW; 115 dB typical with program material, A-weighted, 22kHz BW
- Input Delay Length 100ms
- Alignment Delay 10ms per channel (60ms total)
- Sample Rate 48kHz
- Dynamic Range >110 dB A-weighted, >107dB unweighted
- THD+Noise 0.003% typical at +4dBu, 1kHz, 0dB input gain
- Frequency Response 20Hz – 20kHz, +/- 0.5dB
- Interchannel Crosstalk < -110 dB, -120dB typical (input-to-output: < -100 dB)
- Power Consumption 22 W
For More To Go 123DJ
No comments:
Post a Comment